Configuration

tox configuration can be split into two categories: core and environment specific. Core settings are options that can be set once and used for all tox environments, while environment options are applied to the given tox environment only.

Discovery and file types

Out of box tox supports three configuration locations prioritized in the following order:

  1. tox.ini,

  2. pyproject.toml,

  3. setup.cfg.

With regards to the configuration format, at the moment we only support ini-style. tox.ini and setup.cfg are by nature such files, while in pyproject.toml currently you can only inline the ini-style config.

Note that setup.cfg requires the content to be under the tox:tox and testenv sections and is otherwise ignored. pyproject.toml on the other hand is in TOML format. However, one can inline the ini-style format under the tool.tox.legacy_tox_ini key as a multi-line string.

tox.ini

The core settings are under the tox section while the environment sections are under the testenv:{env_name} section. All tox environments by default inherit setting from the testenv section. This means if tox needs an option and is not available under testenv:{env_name} will first try to use the value from testenv, before falling back to the default value for that setting. For example:

[tox]
min_version = 4.0
env_list =
    py310
    py39
    type

[testenv]
deps = pytest
commands = pytest tests

[testenv:type]
deps = mypy
commands = mypy src

setup.cfg

The core settings are under the tox:tox section while the environment sections are under the testenv:{env_name} section. All tox environments by default inherit setting from the testenv section. This means if tox needs an option and is not available under testenv:{env_name} will first try to use the value from testenv, before falling back to the default value for that setting. For example:

[tox:tox]
min_version = 4.0
env_list =
    py310
    py39
    type

[testenv]
deps = pytest
commands = pytest tests

[testenv:type]
deps = mypy
commands = mypy src

pyproject.toml

You can inline a tox.ini style configuration under the tool.tox section and legacy_tox_ini key.

Below you find the specification for the ini-style format, but you might want to skim some examples first and use this page as a reference.

[tool.tox]
legacy_tox_ini = """
    [tox]
    min_version = 4.0
    env_list =
        py310
        py39
        type

    [testenv]
    deps = pytest
    commands = pytest tests

    [testenv:type]
    deps = mypy
    commands = mypy src
"""

Core

The following options are set in the [tox] section of tox.ini or the [tox:tox] section of setup.cfg.

⚙️ requires with default value of <empty list> 📢 added in 3.2.0

Specify a list of PEP 508 compliant dependencies that must be satisfied in the Python environment hosting tox when running the tox command. If any of these dependencies are not satisfied will automatically create a provisioned tox environment that does not have this issue, and run the tox command within that environment. See provision_tox_env for more details.

[tox]
requires =
    tox>=4
    virtualenv>20.2

⚙️ min_version minversion with default value of <current version of tox>

A string to define the minimal tox version required to run. If the host’s tox version is less than this, it will automatically create a provisioned tox environment that satisfies this requirement. See provision_tox_env for more details.

⚙️ provision_tox_env with default value of .tox 📢 added in 3.8.0

Name of the tox environment used to provision a valid tox run environment.

Changed in version 3.23.0: When tox is invoked with the --no-provision flag, the provision won’t be attempted, tox will fail instead.

⚙️ env_list envlist with default value of <empty list>

A list of environments to run by default (when the user does not specify anything during the invocation).

Changed in version 3.4.0: Which tox environments are run during the tox invocation can be further filtered via the operating system environment variable TOX_SKIP_ENV regular expression (e.g. py27.* means don’t evaluate environments that start with the key py27). Skipped environments will be logged at level two verbosity level.

⚙️ skip_missing_interpreters with default value of config 📢 added in 1.7.2

Setting this to true will force tox to return success even if some of the specified environments were missing. This is useful for some CI systems or when running on a developer box, where you might only have a subset of all your supported interpreters installed but don’t want to mark the build as failed because of it. As expected, the command line switch always overrides this setting if passed on the invocation. Setting it to config means that the value is read from the config file.

⚙️ tox_root toxinidir

The root directory for the tox project (where the configuration file is found).

⚙️ work_dir toxworkdir with default value of {tox_root}/.tox

Directory for tox to generate its environments into, will be created if it does not exist.

⚙️ temp_dir with default value of {work_dir}/.tmp

Directory where to put tox temporary files. For example: we create a hard link (if possible, otherwise new copy) in this directory for the project package. This ensures tox works correctly when having parallel runs (as each session will have its own copy of the project package - e.g. the source distribution).

⚙️ no_package skipsdist with default value of false

Flag indicating to perform the packaging operation or not. Set it to true when using tox for an application, instead of a library.

⚙️ package_env isolated_build_env with default value of .pkg 📢 added in 3.3.0

Default name of the virtual environment used to create a source distribution from the source tree.

⚙️ package_root setupdir with default value of {tox_root}

Indicates where the packaging root file exists (historically setup.py file or pyproject.toml now).

⚙️ labels with default value of <empty dictionary>

A mapping of label names to environments it applies too. For example:

[tox]
labels =
     test = py310, py39
     static = flake8, mypy

Python language core options

⚙️ ignore_base_python_conflict ignore_basepython_conflict with default value of True

Added in version 3.1.0.

tox allows setting the Python version for an environment via the basepython setting. If that’s not set tox can set a default value from the environment name (e.g. py310 implies Python 3.10). Matching up the Python version with the environment name has became expected at this point, leading to surprises when some configs don’t do so. To help with sanity of users, an error will be raised whenever the environment name version does not match up with this expectation.

Furthermore, we allow hard enforcing this rule by setting this flag to true. In such cases we ignore the base_python and instead always use the base Python implied from the Python name. This allows you to configure base_python in the base section without affecting environments that have implied base Python versions.

tox environment

The following options are set in the [testenv] or [testenv:*] sections of tox.ini or setup.cfg.

Base options

envname env_name

The name of the tox environment.

⚙️ env_dir envdir with default value of {work_dir}/{env_name} 📢 added in 1.5

Directory assigned to the tox environment. If not absolute it would be treated as relative to tox_root.

⚙️ env_tmp_dir envtmpdir with default value of {work_dir}/{env_name}/tmp

A folder that is always reset at the start of the run.

⚙️ env_log_dir envlogdir with default value of {work_dir}/{env_name}/log

A folder containing log files about tox runs. It’s always reset at the start of the run. Currently contains every process invocation in the format of <index>-<run name>.log, and details the execution request (command, environment variables, current working directory, etc.) and its outcome (exit code and standard output/error content).

⚙️ platform

Run on platforms that match this regular expression (empty means any platform). If a non-empty expression is defined and does not match against the sys.platform string the entire test environment will be skipped and none of the commands will be executed. Running tox -e <platform_name> will run commands for a particular platform and skip the rest.

⚙️ pass_env passenv with default value of <empty list>

Environment variables to pass on to the tox environment. The values are evaluated as UNIX shell-style wildcards, see fnmatch If a specified environment variable doesn’t exist in the tox invocation environment it is ignored. The list of environment variable names is not case sensitive, for example: passing A or a will pass through both A and a.

More environment variable-related information can be found in Environment variable substitutions.

⚙️ set_env setenv

A dictionary of environment variables to set when running commands in the tox environment. Lines starting with a file| prefix define the location of environment file.

Note

Environment files are processed using the following rules:

  • blank lines are ignored,

  • lines starting with the # character are ignored,

  • each line is in KEY=VALUE format; both the key and the value are stripped,

  • there is no special handling of quotation marks, they are part of the key or value.

More environment variable-related information can be found in Environment variable substitutions.

⚙️ parallel_show_output with default value of False 📢 added in 3.7

If set to True the content of the output will always be shown when running in parallel mode.

⚙️ recreate with default value of False

Always recreate virtual environment if this option is true, otherwise leave it up to tox.

⚙️ allowlist_externals with default value of <empty list>

Each line specifies a command name (in glob-style pattern format) which can be used in the commands section even if it’s located outside of the tox environment. For example: if you use the unix rm command for running tests you can list allowlist_externals=rm or allowlist_externals=/usr/bin/rm. If you want to allow all external commands you can use allowlist_externals=* which will match all commands (not recommended).

⚙️ labels with default value of <empty list>

A list of labels to apply for this environment. For example:

[testenv]
labels = test, core
[testenv:flake8]
labels = mypy

Execute

⚙️ suicide_timeout with default value of 0.0 📢 added in 3.15.2

When an interrupt is sent via Ctrl+C or the tox process is killed with a SIGTERM, a SIGINT is sent to all foreground processes. The suicide_timeout gives the running process time to cleanup and exit before receiving (in some cases, a duplicate) SIGINT from tox.

⚙️ interrupt_timeout with default value of 0.3 📢 added in 3.15

When tox is interrupted, it propagates the signal to the child process after suicide_timeout seconds. If the process still hasn’t exited after interrupt_timeout seconds, its sends a SIGTERM.

⚙️ terminate_timeout with default value of 0.2 📢 added in 3.15

When tox is interrupted, after waiting interrupt_timeout seconds, it propagates the signal to the child process, waits interrupt_timeout seconds, sends it a SIGTERM, waits terminate_timeout seconds, and sends it a SIGKILL if it hasn’t exited.

Run

⚙️ base with default value of testenv 📢 added in 4.0.0

Inherit missing keys from these sections.

⚙️ runner with default value of 📢 added in 4.0.0

The tox execute used to evaluate this environment. Defaults to Python virtual environments, however may be overwritten by plugins.

⚙️ description with default value of <empty string>

A short description of the environment, this will be used to explain the environment to the user upon listing environments.

⚙️ depends with default value of <empty list>

tox environments that this environment depends on (must be run after those).

Warning

depends does not pull in dependencies into the run target, for example if you select py310,py39,coverage via the -e tox will only run those three (even if coverage may specify as depends other targets too - such as py310, py39, py38). This is solely meant to specify dependencies and order in between a target run set.

⚙️ commands_pre with default value of <empty list> 📢 added in 3.4

Commands to run before running the commands. All evaluation and configuration logic applies from commands.

⚙️ commands with default value of <empty list>

The commands to be called for testing. Only execute if commands_pre succeed. Each line is interpreted as one command; however a command can be split over multiple lines by ending the line with the \ character.

Commands will execute one by one in sequential fashion until one of them fails (their exit code is non-zero) or all of them succeed. The exit code of a command may be ignored (meaning they are always considered successful) by prefixing the command with a dash (-) - this is similar to how make recipe lines work. The outcome of the environment is considered successful only if all commands (these + setup + teardown) succeeded (exit code ignored via the - or success exit code value of zero).

Note

The virtual environment binary path (see env_bin_dir) is prepended to the PATH environment variable, meaning commands will first try to resolve to an executable from within the virtual environment, and only after that outside of it. Therefore python translates as the virtual environments python (having the same runtime version as the base_python), and pip translates as the virtual environments pip.

Note

shlex POSIX-mode quoting rules are used to split the command line into arguments on all supported platforms as of tox 4.4.0.

The backslash \ character can be used to escape quotes, whitespace, itself, and other characters (except on Windows, where a backslash in a path will not be interpreted as an escape). Unescaped single quote will disable the backslash escape until closed by another unescaped single quote. For more details, please see shlex parsing rules.

Note

Inline scripts can be used, however note these are discovered from the project root directory, and is not influenced by change_dir (this only affects the runtime current working directory). To make this behavior explicit we recommend that you make inline scripts absolute paths by prepending {tox_root}, instead of path/to/my_script prefer {tox_root}{/}path{/}to{/}my_script. If your inline script is platform dependent refer to Platform specification on how to select different script per platform.

⚙️ commands_post with default value of <empty list>

Commands to run after running the commands. Execute regardless of the outcome of both commands and commands_pre. All evaluation and configuration logic applies from commands.

⚙️ change_dir changedir with default value of {tox_root}

Change to this working directory when executing the test command. If the directory does not exist yet, it will be created (required for Windows to be able to execute any command).

⚙️ args_are_paths with default value of False

Treat positional arguments passed to tox as file system paths and - if they exist on the filesystem and are in relative format - rewrite them according to the current and change_dir working directory. This handles automatically transforming relative paths specified on the CLI to relative paths respective of the commands executing directory.

⚙️ ignore_errors with default value of False

When executing the commands keep going even if a sub-command exits with non-zero exit code. The overall status will be “commands failed”, i.e. tox will exit non-zero in case any command failed. It may be helpful to note that this setting is analogous to the -k or --keep-going option of GNU Make.

⚙️ ignore_outcome with default value of False

If set to true a failing result of this test environment will not make tox fail (instead just warn).

⚙️ skip_install with default value of False 📢 added in 1.9

Skip installation of the package. This can be used when you need the virtualenv management but do not want to install the current package into that environment.

⚙️ package_env with default value of {package_env} 📢 added in 4.0.0

Name of the virtual environment used to create a source distribution from the source tree for this environment.

⚙️ package_tox_env_type with default value of virtualenv-pep-517 📢 added in 4.0.0

tox package type used to package.

Python options

⚙️ base_python basepython with default value of <{env_name} python factor> or <python version of tox>

Name or path to a Python interpreter which will be used for creating the virtual environment, first one found wins. This determines in practice the Python for what we’ll create a virtual isolated environment. Use this to specify the Python version for a tox environment. If not specified, the virtual environments factors (e.g. name part) will be used to automatically set one. For example, py310 means python3.10, py3 means python3 and py means python. If the name does not match this pattern the same Python version tox is installed into will be used.

Changed in version 3.1: After resolving this value if the interpreter reports back a different version number than implied from the name a warning will be printed by default. However, if ignore_basepython_conflict is set, the value is ignored and we force the base_python implied from the factor name.

Note

Leaving this unset will cause an error if the package under test has a different Python requires than tox itself and tox is installed into a Python that’s not supported by the package. For example, if your package requires Python 3.10 or later, and you install tox in Python 3.9, when you run a tox environment that has left this unspecified tox will use Python 3.9 to build and install your package which will fail given it requires 3.10.

env_site_packages_dir envsitepackagesdir

The Python environments site package - where packages are installed (the purelib folder path).

env_bin_dir envbindir

The binary folder where console/gui scripts are generated during installation.

env_python envpython

The Python executable from within the tox environment.

Python run

⚙️ deps with default value of <empty list>

Name of the Python dependencies. Installed into the environment prior to project after environment creation, but before package installation. All installer commands are executed using the tox_root as the current working directory. Each value must be one of:

  • a Python dependency as specified by PEP 440,

  • a requirement file when the value starts with -r (followed by a file path),

  • a constraint file when the value starts with -c (followed by a file path).

For example:

[testenv]
deps =
    pytest>=7,<8
    -r requirements.txt
    -c constraints.txt

⚙️ use_develop usedevelop with default value of false 📢 added in 1.6

Install the current package in development mode using PEP 660. This means that the package will be installed in-place and editable.

Note

package = editable is the preferred way to enable development/editable mode. See the details in package.

Note

PEP-660 introduced a standardized way of installing a package in development mode, providing the same effect as if pip install -e was used.

⚙️ package 📢 added in 4.0

When option can be one of wheel, sdist, editable, editable-legacy, skip, or external. If use_develop is set this becomes a constant of editable. If skip_install is set this becomes a constant of skip.

⚙️ wheel_build_env with default value of <package_env>-<python-flavor-lowercase><python-version-no-dot> 📢 added in 4.0

If package is set to wheel this will be the tox Python environment in which the wheel will be built. The value is generated to be unique per Python flavor and version, and prefixed with package_env value. This is to ensure the target interpreter and the generated wheel will be compatible. If you have a wheel that can be reused across multiple Python versions set this value to the same across them (to avoid building a new wheel for each one of them).

⚙️ extras with default value of <empty list> 📢 added in 2.4

A list of “extras” from the package to be installed. For example, extras = testing is equivalent to [testing] in a pip install command.

External package builder

tox supports operating with externally built packages. External packages might be provided in two ways:

  • explicitly via the –installpkg CLI argument,

  • setting the package to external and using a tox packaging environment named <package_env>_external (see package_env) to build the package. The tox packaging environment takes all configuration flags of a python environment, plus the following:

⚙️ deps with default value of <empty list>

Name of the Python dependencies as specified by PEP 440. Installed into the environment prior running the build commands. All installer commands are executed using the tox_root as the current working directory.

⚙️ commands with default value of <empty list>

Commands to run that will build the package. If any command fails the packaging operation is considered failed and will fail all environments using that package.

⚙️ ignore_errors with default value of False

When executing the commands keep going even if a sub-command exits with non-zero exit code. The overall status will be “commands failed”, i.e. tox will exit non-zero in case any command failed. It may be helpful to note that this setting is analogous to the -k or --keep-going option of GNU Make.

⚙️ change_dir changedir with default value of {tox_root}

Change to this working directory when executing the package build command. If the directory does not exist yet, it will be created (required for Windows to be able to execute any command).

⚙️ package_glob with default value of {envtmpdir}{/}dist{/}*

A glob that should match the wheel/sdist file to install. If no file or multiple files is matched the packaging operation is considered failed and will raise an error.

Python virtual environment

⚙️ system_site_packages sitepackages with default value of False

Create virtual environments that also have access to globally installed packages. Note the default value may be overwritten by the VIRTUALENV_SYSTEM_SITE_PACKAGES environment variable.

Warning

In cases where a command line tool is also installed globally you have to make sure that you use the tool installed in the virtualenv by using python -m <command line tool> (if supported by the tool) or {env_bin_dir}/<command line tool>. If you forget to do that you will get an error.

⚙️ always_copy alwayscopy with default value of False

Force virtualenv to always copy rather than symlink. Note the default value may be overwritten by the VIRTUALENV_COPIES or VIRTUALENV_ALWAYS_COPY (in that order) environment variables. This is useful for situations where hardlinks don’t work (e.g. running in VMS with Windows guests).

⚙️ download with default value of False 📢 added in 3.10

True if you want virtualenv to upgrade pip/wheel/setuptools to the latest version. Note the default value may be overwritten by the VIRTUALENV_DOWNLOAD environment variable. If (and only if) you want to choose a specific version (not necessarily the latest) then you can add VIRTUALENV_PIP=20.3.3 (and similar) to your set_env.

Python virtual environment packaging

⚙️ meta_dir with default value of {env_dir}/.meta 📢 added in 4.0.0

Directory where to put the project metadata files.

⚙️ pkg_dir with default value of {env_dir}/.dist 📢 added in 4.0.0

Directory where to put project packages.

⚙️ config_settings_get_requires_for_build_sdist 📢 added in 4.11

Config settings (dict[str, str]) passed to the get_requires_for_build_sdist backend API endpoint.

⚙️ config_settings_build_sdist 📢 added in 4.11

Config settings (dict[str, str]) passed to the build_sdist backend API endpoint.

⚙️ config_settings_get_requires_for_build_wheel 📢 added in 4.11

Config settings (dict[str, str]) passed to the get_requires_for_build_wheel backend API endpoint.

⚙️ config_settings_prepare_metadata_for_build_wheel 📢 added in 4.11

Config settings (dict[str, str]) passed to the prepare_metadata_for_build_wheel backend API endpoint.

⚙️ config_settings_build_wheel 📢 added in 4.11

Config settings (dict[str, str]) passed to the build_wheel backend API endpoint.

⚙️ config_settings_get_requires_for_build_editable 📢 added in 4.11

Config settings (dict[str, str]) passed to the get_requires_for_build_editable backend API endpoint.

⚙️ config_settings_prepare_metadata_for_build_editable 📢 added in 4.11

Config settings (dict[str, str]) passed to the prepare_metadata_for_build_editable backend API endpoint.

⚙️ config_settings_build_editable 📢 added in 4.11

Config settings (dict[str, str]) passed to the build_editable backend API endpoint.

⚙️ fresh_subprocess with default value of True if build backend is setuptools otherwise False 📢 added in 4.14.0

A flag controlling if each call to the build backend should be done in a fresh subprocess or not (especially older build backends such as setuptools might require this to discover newly provisioned dependencies).

Pip installer

⚙️ install_command with default value of python -I -m pip install {opts} {packages} 📢 added in 1.6

Determines the command used for installing packages into the virtual environment; both the package under test and its dependencies (defined with deps). Must contain the substitution key {packages} which will be replaced by the package(s) to install. You should also accept {opts} – it will contain index server options such as --pre (configured as pip_pre).

Note

You can also provide arbitrary commands to the install_command. Please take care that these commands can be executed on the supported operating systems. When executing shell scripts we recommend to not specify the script directly but instead pass it to the appropriate shell as argument (e.g. prefer bash script.sh over script.sh).

⚙️ list_dependencies_command with default value of python -m pip freeze --all 📢 added in 2.4

The list_dependencies_command setting is used for listing the packages installed into the virtual environment. This command will be executed only if executing on Continuous Integrations is detected (for example set environment variable CI=1) or if journal is active.

⚙️ pip_pre with default value of false 📢 added in 1.9

If true, adds --pre to the opts passed to install_command. This will cause it to install the latest available pre-release of any dependencies without a specified version. If false, pip will only install final releases of unpinned dependencies.

⚙️ constrain_package_deps with default value of false 📢 added in 4.4.0

If constrain_package_deps is true, then tox will create and use {env_dir}{/}constraints.txt when installing package dependencies during install_package_deps stage. When this value is set to false, any conflicting package dependencies will override explicit dependencies and constraints passed to deps.

⚙️ use_frozen_constraints with default value of false 📢 added in 4.4.0

When use_frozen_constraints is true, then tox will use the list_dependencies_command to enumerate package versions in order to create {env_dir}{/}constraints.txt. Otherwise the package specifications explicitly listed under deps (or in requirements / constraints files referenced in deps) will be used as the constraints. If constrain_package_deps is false, then this setting has no effect.

User configuration

tox allows creation of user level config-file to modify default values of the CLI commands. It is located in the OS-specific user config directory under tox/config.ini path, see tox --help output for exact location. It can be changed via TOX_USER_CONFIG_FILE environment variable. Example configuration:

[tox]
skip_missing_interpreters = true

Substitutions

Any key=value setting in an ini-file can make use of value substitution through the {...} string-substitution pattern.

The string inside the curly braces may reference a global or per-environment config key as described above.

In substitutions, the backslash character \ will act as an escape when preceding {, }, :, [, or ], otherwise the backslash will be reproduced literally:

commands =
    python -c 'print("\{posargs} = \{}".format("{posargs}"))'
    python -c 'print("host: \{}".format("{env:HOSTNAME:host\: not set}")'

Note that any backslashes remaining after substitution may be processed by shlex during command parsing. On POSIX platforms, the backslash will escape any following character; on windows, the backslash will escape any following quote, whitespace, or backslash character (since it normally acts as a path delimiter).

Special substitutions that accept additional colon-delimited : parameters cannot have a space after the : at the beginning of line (e.g. {posargs: magic} would be parsed as factorial {posargs, having value magic).

Environment variable substitutions

If you specify a substitution string like this:

{env:KEY}

then the value will be retrieved as os.environ['KEY'] and raise an Error if the environment variable does not exist.

Environment variable substitutions with default values

If you specify a substitution string like this:

{env:KEY:DEFAULTVALUE}

then the value will be retrieved as os.environ['KEY'] and replace with DEFAULTVALUE if the environment variable does not exist.

If you specify a substitution string like this:

{env:KEY:}

then the value will be retrieved as os.environ['KEY'] and replace with an empty string if the environment variable does not exist.

Substitutions can also be nested. In that case they are expanded starting from the innermost expression:

{env:KEY:{env:DEFAULT_OF_KEY}}

the above example is roughly equivalent to os.environ.get('KEY', os.environ['DEFAULT_OF_KEY'])

Interactive shell substitution

Added in version 3.4.0.

It’s possible to inject a config value only when tox is running in interactive shell (standard input):

{tty:ON_VALUE:OFF_VALUE}

The first value is the value to inject when the interactive terminal is available, the second value is the value to use when it’s not (optional). A good use case for this is e.g. passing in the --pdb flag for pytest.

Substitutions for positional arguments in commands

Added in version 1.0.

If you specify a substitution string like this:

{posargs:DEFAULTS}

then the value will be replaced with positional arguments as provided to the tox command:

tox arg1 arg2

In this instance, the positional argument portion will be replaced with arg1 arg2. If no positional arguments were specified, the value of DEFAULTS will be used instead. If DEFAULTS contains other substitution strings, such as {env:*}, they will be interpreted.,

Use a double -- if you also want to pass options to an underlying test command, for example:

tox -- --opt1 ARG1

will make the --opt1 ARG1 appear in all test commands where [] or {posargs} was specified. By default (see args_are_paths setting), tox rewrites each positional argument if it is a relative path and exists on the filesystem to become a path relative to the changedir setting.

Substitution for values from other sections

Added in version 1.4.

Values from other sections can be referred to via:

{[sectionname]valuename}

which you can use to avoid repetition of config values. You can put default values in one section and reference them in others to avoid repeating the same values:

[base]
deps =
    pytest
    mock
    pytest-xdist

[testenv:dulwich]
deps =
    dulwich
    {[base]deps}

[testenv:mercurial]
deps =
    mercurial
    {[base]deps}

Other Substitutions

  • {} - replaced as os.pathsep

  • {/} - replaced as os.sep

Overriding configuration from the command line

You can override options in the configuration file, from the command line.

For example, given this config:

[testenv]
deps = pytest
setenv =
  foo=bar
commands = pytest tests

You could enable ignore_errors by running:

tox --override testenv.ignore_errors=True

You could add additional dependencies by running:

tox --override testenv.deps+=pytest-xdist

You could set additional environment variables by running:

tox --override testenv.setenv+=baz=quux

You can specify overrides multiple times on the command line to append multiple items:

tox -x testenv.seteenv+=foo=bar -x testenv.setenv+=baz=quux
tox -x testenv.deps+=pytest-xdist -x testenv.deps+=pytest-cov

Or reset override and append to that (note the first override is = and not +=):

tox -x testenv.deps=pytest-xdist -x testenv.deps+=pytest-cov

Set CLI flags via environment variables

All CLI flags can be set via environment variables too, the naming convention here is TOX_<option>. E.g. TOX_WORK_DIR sets the --workdir flag, or TOX_OVERRIDE sets the --override flag. For flags accepting more than one argument, use the ; character to separate these values:

# set FOO and bar as passed environment variable
$ env 'TOX_OVERRIDE=testenv.pass_env=FOO,BAR' tox c -k pass_env -e py
[testenv:py]
pass_env =
  BAR
  FOO
  <default pass_envs>

# append FOO and bar as passed environment variable to the list already defined in
# the tox configuration
$ env 'TOX_OVERRIDE=testenv.pass_env+=FOO,BAR' tox c -k pass_env -e py
[testenv:py]
pass_env =
  BAR
  FOO
  <pass_envs defined in configuration>
  <default pass_envs>

# set httpx and deps to and 3.12 as base_python
$ env 'TOX_OVERRIDE=testenv.deps=httpx;testenv.base_python=3.12' .tox/dev/bin/tox c \
      -k deps base_python -e py
[testenv:py]
deps = httpx
base_python = 3.12